Welcome to Western Canada's largest full-service beads and
jewelry supply house
to see us for the first time?
Check out our
trip planner on the "Contact
Us" page. Both driving information
(Google Maps) and transit route
planning information links (Translink) are given (Tip: you can get to this
page from anywhere on our site by clicking on our logo on the
top left hand corner of the page)
here to take a virtual tour of Capilano Rock & Gem!
5 May 2015 - a very special thanks to
those who came to see us at the CRLC Gem & Mineral Show in Calgary
this past weekend!
13 April 2015 - 3 new items from
With our new Steel Riveting Block, there is no more
guesswork on the length of wire to be cut. Use the holes at
the top to pre-cut the perfect length of wire for your
projects. The holes in the middle are about 1.8mm deep, thus
every cut is just the right amount of wire needed to create
"head" on both sides. The dimples on the left side are used
for support when riveting in order to hold the shape of the
rounded rivet head. The circles on the right side are for
riveting eyelets in 3 different sizes without flattening the
rounded rims. Dimples on the side of the block are for
rivets and on the opposite side are circles for eyelets.
Both of these sides are for CURVED surfaces and must be
mounted in a vise. Item # ANV-120.00 $ 46.50
Our nylon tipped forming hammer has an all-metal head with
changeable nylon faces that will not mar your metal. The set
includes nine nylon peg inserts in a variety of shapes that
are easily changed and secured by a set-screw. Perfect for
raising, planishing and embossing work. Hammer weight 4 oz
with two nylon tips attached. Overall length 9.5 inches.
Item # HAM-485.00 $ 21.95
Create holes for wire rivets in 18, 16, 14 and 12 gauge.
Punch holes up to 18 gauge metal sheets or multiple metal
sheets together with ease. Item # PUN-420.04 $ 62.50
30 March 2015 - A very special thanks to
those who came and saw us at the Fraser Valley Bead Show this past
weekend at the Gizeh Shriners' Hall in Burnaby.
15 September 2014 - Ask us about Miyuki
Capilano Rock & Gem has gift cards!
These are available in any desired amount.
360 Degree Rotating Soldering Pan
||FUME EXTRACTOR -
Lead-free solder has
created a healthier environment, but the more active fluxes
required to be used
with it give off more fumes. Our new
Fume Extractor is the perfect solution to this smoky
• Remove flux fumes from soldering
workbench by drawing smoke through carbon-activated filter.
• Can process up to 1.37 cubic meters of air per minute.
• Includes one replacement filter.
• Adjustable for
• Quiet fan